Arcus-EDS GmbH
Rigaer Str. 88 , 10247 Berlin
Tel.: +49 / (0)30 / 2593 3914
sales@arcus-eds.de
Fax.: +49 / (0)30 / 2593 3915
e4
Subject to change
arcus-eds
I
KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 2
Commisioning and Connector Description
Commissioning the KNX display is carried out using the ETS (EIB Tool Software) and the corresponding application software. At
delivery, the device is unprogrammed. All functions must be parameterized and programmed using the ETS. Please review the
documentations belonging to the ETS.
The touch screen is designed for in-wall installation. The degree of protection is IP20. Installation is carried out using the support
ring and the magnetic fixing. A locking screw type Torx-6 serves for fixation.
The connections of the Touch_IT C3-AE-IP65 are identical.
Das Touch_IT C3 AE-IP65 wird mittels zwei Schrauben an der Wand o.ä. befestigt.
Please make sure that electronic parts do not get damaged by tools or cable ends during installation.
Display:
3,5“ TFT Touchscreen
Processor:
200MHz 32-Bit ARM
Operating System:
Linux
Additional
Voltage:
9 .. 32VDC / ca. 1,5W
Ambient Temperature Operation:
-5 .. +55 °C
Ambient Temperature Storage:
-5 .. +60 °C
Optional Temperature-Probe:
1-Wire bus
Ambient temperature according to manufacturer’s specifications.
Protection Touch_IT C3-AE-IP65:
IP65
Protection Touch_IT C3-xxx:
IP20
Touch_IT C3 Assembly View
Additional Power Supply
9 .. 32VDC / 1,5W
Mounting Link
( up )
KNX Terminalblock
1-Wire Probe Connector
Temperature
MicroSD Slot
Mini-USB-Plug
Programming Button
LED
Seite 2
