Arcus-EDS GmbH
Rigaer Str. 88 , 10247 Berlin
Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de
x
sales@arcus-eds.de
Fax.: +49 / (0)30 / 2593 3915
e4
Subject to change
arcus-eds
I
KNX
SM
IMPZ2
Smart Metering
Product Page
KNX-IMPZ2 2 Channel Impulse Counter
Page 13
5 Product Page
The Counter-Module
KNX-IMPZ2
is used for remote reading and monitoring of
metering data
The module is suitable to detect measured values of heat-, water-, current- and
gas meters with S0-Interface.
The IMPZ2 can be used as two independent counters or be used as one
counter with scales switching.
The device has an integrated bus coupling unit and needs no auxiliary power.
The Counter-Module
KNX-IMPZ2-SK01
is delivered in an impact-resistant
glass-ball reinforced plastic housing with seal and meet the protection class
IP54.
The Counter-Modul
KNX-IMPZ2-REG
is suitable for DIN rail mountingand meet
the IP20 degree of protection
Areas of Application
•
General monitoring of consumption values
Article-No.:
6020120x
KNX-IMPZ2
2 Channel Impuls Counter
SK01 IP54
REG IP20
The counter inputs run on the S0 interface by default.
( according to the DIN 43864) but can also be connected with a
potential free contact.
Operating Temperature:
-20 .. +55 °C
Storage Temperature:
-20 .. +85 °C
Operating Voltage:
21 .. 32VDC
Power Consumption:
ca. 240mW ( at 24VDC )
Protection Class:
KNX-IMPZ2-SK01:
IP54
KNX-IMPZ2-REG:
IP20
Seite 13
›
‹
»
«
