TITAN-SVX-ETH Hardware Manual
page 8
Rev 4.03
4. Connectivity
4.1. 2-Pin Power Connector
In order for the TITAN-SVX-ETH to operate, it must be supplied with +24VDC to
+48VDC power supply. For typical operation, +24VDC power supply is
recommended. For high speed applications, especially with the stepper motors,
48VDC power supply is recommended.
Power pins and communication port pin outs are shown below.
Figure 4.0
Pin #
Name
Description
1
V+
Power Input +24 to +48 VDC
2
G
Power Supply Ground
Table 4.0
Mating Connector Description:
2 pin Mini Fit Jr connector
Mating Connector Manufacturer:
Molex
Mating Connector Manufacturer Part:
†
39-01-2025
† Other compatible connectors can be used.
1
2