22
ENGLISH
7.3 Install/remove the armrest (CP2xx CP7xx)
(FIG.9)
(FIG.10)
• Place the armrest rear side into the rear socket, then hook them into the front socket by
overturning them
(FIG.9)
• To remove, unlock the armrest by pushing the front release lever, then overturn them and
extract by pulling the rear release lever
(FIG.10)
7.4 Install/remove the armrest (CP6xx)
• To install the armest insert them into their tubes until the clips is blocked. Before install
assure that the sideboard are inward
(fig. 11)
• To remouve the armrest press the unlock device
(A)
then lift them upward
(fig. 11)
(fig. 11)
A
- Lock device
B
- Lock clip
7.5 Install/remove the lateral or elevating footrest
(FIG.12)
•
Assembly the lateral or elevating footrest
by installing the hinge plates on the
footrest onto the hinge pins on the
wheelchair frame. Push the footrest
toward inside of the wheelchair until it
locks into place
(FIG.12)
•
Remove the footrest by pushing the footrest release
lever inward, rotate outward, lift the footrest
off the hinge pins
MA CP2xx_CP6xx_CP7xx 01 A.indd 22
09/05/14 10:42
