21
ENGLISH
7.5.2 Elastic adjustable backrest (only for model CP760-xx)
(FIG.6)
The backrest for model CP760-xx is elastic and
adjustable to facilitate the containment of the trunk.
How to adjust the tension of the backrest:
• Remove the cushion from the backrest
• Loosen the Velcro straps
• Position the patient to allow more winding trunk
• Close bands
• Reposition the cushion back
7.5.3 Backrest angle adjustment (only for models CP750-XX and CP760-xx)
The backrest angle can be adjusted by loosening the cap screws in the bracket
adjustment. Once you have found the desired angle, reattach the cap screws.
7.5.4 Adjustment of the rear wheels
The rear wheels of the wheelchair can be adjusted. The models of the Helios (CP740-xx) only
allow a height adjustment of the rear wheels, while the models Helios1 and 2 (CP750-xx and
CP760-xx) allow both height and depth adjustment.
To change the height of the rear wheels take off the big rear wheel through the quick release,
remove the screws, move the plate up or down, replace the screws and tighten the nuts.
To adjust the depth of the rear wheels (only for models Helios1 and 2 CP750-xx and CP760-xx),
remove the big wheel through quick release, remove the bushing, nut and washer, position the
bushing in the desired hole and replace the screws in the respective housings, screw all parties.
7.5.5 Adjustment of the front wheels valid for all models
To change the height of the front wheels, remove the screws, move the wheel at the desired
holes in the fork, insert the screws again.
7.5.6 Adjusting the height of the push handles valid (only for models CP750-xx and CP760-xx)
To adjust the height of the push handles remove the backrest cushion (where applicable).
Remove the fixing screws of the backrest, slide the fabric of the backrest upwards for some
centimeters to find the fixing between tubes and wheelchair frame. Unscrew the bolt and
adjust the height of the tube to the desired point. Screw the bolt, slide down the back, fix the
screws back to the wheelchair, replace the padding (where applicable).
8. BEFORE USE
• Inspect the frame for any damage. Check the tubing for cracks and rust, in order to
guarantee the safe for people ant thing
• Check the correct assembly, in order to guarantee a safe use
• Check the seat is completely open. If not push the seat down from the lateral frame.
• Check the brake correctly works
