14
Instructions for use
Assembly.
Caution! The fan should always be switched off and does not connected
to the mains supply, if you mounting the fan.
- To fix the base to the body fan, set the fan gently on the head. Use a soft
surface to not damage the top of the product.
- Add the 2 halves of the base together and set them on the body fan.
- Fix the base with the provided screws on the body fan. Make sure the
cable is not clamped.
- Fix the cable with the preassembled strain relief as showed in the
picture below (picture number 1).
Picture 1
Pay attention that all the parts are correct and firmly connected with each
other.
Caution! Connect to the mains supply only after the fan has been fully
assembled.
- The fan must not be used without a fixed base
- The device may be operated only in straight and upright position
- This device may not be used in a horizontal position
Before plug the product check if it is switched Off. Insert the plug of the
fan into a suitable socket outlet. Set the speed/oscillation using the knob
as below:
1 = low speed
2 = middle speed
3 = high speed
off = off
1 = low speed with oscillation
2 = middle speed with oscillation
3 = high speed with oscillation
