EN
16
If this happens again, first check if the thermostat regulator is set correctly and if
foreign objects do not interfere with the correct operation of the convector.
CLEANING AND CARE
• Before cleaning, disconnect the device from the mains and
let it cool down.
• At least once a month, clean the convector grids from dust
with a brush and a vacuum cleaner with a corresponding
attachment.
• Do not use abrasive or aggressive materials that can
damage the convector coating.
• Wipe the outer surface of the device (6) with a damp cloth
and then wipe the fan heater dry.
• Do not immerse the fan heater body, the power cord or
the plug into water or any other liquids. Provide that water
does not get into the fan heater body to avoid electric
shock.
TRANSPORTATION AND STORAGE
Convectors in the manufacturer’s packaging can be transported by all types of
covered vehicles, which ensure their protection against atmospheric precipitation
and mechanical damage, in accordance with the rules for the carriage of goods in
force on this type of transport.
Transportation is allowed at temperatures from 50 °C to -50 °C and relative
humidity not more than 80%, in accordance with the handling signs on the
package, and with the exception of shock and movement inside the vehicle.
Convectors should be stored in the manufacturer’s packaging in dry, heated
rooms at temperatures from 5 °C to 40 °C and relative humidity not exceeding
80 %.
Keep the device out of reach of children and disabled persons.
Storage of convectors in rooms together with liquids and substances, the
evaporation of which can cause corrosion of structural elements is not allowed.
