EN
3
3)
Replace the top-hinge and the top-door limit block and the door bearing bush to the other
side.
A.
Remove the nut with sleeve.Take off the washer then remove the axes to the other side
and fixed.
B.
Remove the door limit block
C.
Please taking out another door limit block, with screw mounting to the door
4)
Disassemble the screws fixed the bottom-hinge with cross-slot screwdriver .
4
Note
：
the refrigerator-freezer incline angle less 45
°
.
5)
Replace the bottom door bearing bush and the limit block.
6)
Replace the bottom hinge to the other side then fix it with screws
.
7)
Replace the mid-hinge.
