EN
5
8)
Set the bottom door right position,fix the mid-hinge.
9)
Replace the top-hinge.
10)
Set the top door right position,fix the top-hinge and the cover.
11)
Install the four screw caps and two catches to corresponding position.
·
Ensure the Appliance is unplugged and empty.
·
Adjust the two leveling feet to their highest position.
·
We recommend you have someone to assist you.
12)
replace the leveler to the other side and adjust it to make sure the cabinet level.
6
*The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor
2.3
Door Handle Install Illumination (optional)
Note: Figures in the user manual are only for reference. The actual product may differ slightly.
The refrigerator must be disconnected from the source of electrical supply before attempting the
installation of accessory.
Step 1: take out two plug pins from the door (Side of door open)
Step 2: Install the door handle to the door and fasten it with screws
Step 3: Cover screw caps of the handle into screw holes
*The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor
