18
EN
FAN ASSEMBLY
INDEX PART NAME
1.
Mist outlet dish
2.
Front fan guard
3.
Blade cap
4.
Fan blade
5.
Grill mounting nut
6.
Rear fan guard
7.
Motor set
8.
Set screw
9.
Main body
10.
Set screw
11.
Wheels
12.
Set screw
13.
Tube Joint
14.
Set screw
Assembling the fan as below according to above chart:
1. Fix the 4 wheels into their holes of base.
2. Install fan body on the base, and fasten the base nut.
3. Insert the rear guard into the motor and match 3 rods on the front
side of the motor to 3 holes of the rear guard, and fasten the rear
guard tightly by turning the guard mounting nut clockwise.
4. Insert the blade to the shaft and ensure the pin enter the
blade slot and tighten the blade using the blade cap turning
anticlockwise.
5. Fix the front guard in the upright position on the rear guard, and
clip it properly. Make sure that they are connected from the upper
side.
6. Fix the plastic tube into front mist plate and tube joint, then finish
assembling.
