EN
28
INITIAL USE:
The unit may emit odour or vapour on initial use or if heater has not been used for
an extended period. This is normal.
OPERATION BY REMOTE CONTROLLER:
The heater is operated from the remote control supplied with the heater. Insert 2
x AAA Alkaline batteries into the remote control.
Remote Control Function
Button Function (Heater On)
Function (Heater Off)
LED Display on Heater
1
Turns heater on or off
2
Increase Heat Level or
Timer hours
Turns heater on to Level
1 (minimum)
L1
3
Decrease Heat Level or
Timer Hours
Turns heater on to Level
4 (Maximum)
L4
4
Enable Heat Level
adjustment
L [n]
5
Enable Timer
adjustment
00-24
[00]-[24]
1. POWER BUTTON: Turns heater on or off.
2. UP BUTTON: Increases the temperature and timer
level.
3. DOWN BUTTON: Decreases temperature and timer
level.
4. LEVEL BUTTON: Use to adjust heat levels (L1-L4).
Press the Level button then use the up and down
buttons (2 and 3) to increase or decrease the heat-
ing level.
5. TIMER BUTTON: Use to set the timer from 00 – 24(0-
24 hours). Adjust using buttons 2 & 3 to the number
of hours you would like to set.
All remote controls have the same frequency, so it is possible to control several
heaters with just one remote.
