EN
21
ATTENTION:
Make sure that no other high-power electrical
appliances are connected to the outlet to which the heater is
connected.
• Plug your device’s plug into a suitable grounded outlet.
• Select the required heating mode by pressing the
corresponding switch on the control panel.
Due to the inner thermostat, the device may turn on and off
periodically during operation. These periodic times may vary
depending on the mode in which the device operates and the
ambient temperature.
After using the heater, turn the control panel switches to the «off»
position and unplug the power cord from the outlet.
Notes:
While the first switching on the heating element burns, therefore
occurrence of a small amount of smoke or foreign smell is possible.
It is normal, after some time the smoke and smell will disappear. It
is recommended to ventilate the room.
The heater has a tip-over safety system.
In the event of any tip over the safety system will activate and turn
off the device’s power. Turn off the device, unplug the power cord
from the outlet and make sure that the cause of the tipping over
is eliminated. After that return the heater to the working position
and turn it on again.
Please note:
If the device is not used for a long period of time,
as well as during cleaning or maintenance or moving, the heater
must be turned off and unplugged from the electrical outlet.
Periodic inspection and removal of contamination will ensure safe
use of the device.
Summary of Contents for IHS-1650
Page 28: ......