19
EN
TOMATO JUICER
ASSEMBLING
1. Place the plastic screw locking ring
into the sleeve (fig.1).
2. Place the gauze into the sleeve next
to the plastic screw locking ring (fig.2).
3. Put the fixing ring through the sleeve
and make it at the end of the sleeve
(fig.3).
4. Place the snake into the head, long
end first, and turn to feed the snake
slightly until it is set into the motor
housing (fig.4).
5. Insert the shaft of the snake into the
central axis of the screw (fig.5).
6. Put the whole sleeve along with the
fixing ring through the
screw, then move the fixing ring clock-
wise so that it being fastened tightly
(fig.6).
7. Put the plastic juice tray through the
sleeve and make it on the suitable
position (fig.7).
8. Insert the plastic screw into the hole
of the sleeve, then move it clockwise
until it is properly fastened. Then
place the plastic cover onto the sleeve
(fig.8).
Now the appliance is ready for juicing.
