EN
41
REFRIGERATOR DOOR INSTALL GUIDELINES ABOUT SWAPPING LEFT&RIGHT (OPTIONAL)
17
2
、
Remove the screws fixed the top-hinge with cross-slot
screwdriver.
18
3
、
Replace the top-hinge and the door limit block and the door
bearing bush to the other side
A
、
replace the top-hinge.
The screws fixed
the top-hinge
Ensure the Appliance is unplugged and empty.
Adjust the two leveling feet to their highest position.
We recommend you have someone to assist you.
22
6
、
Set the door right position,fix the top-hinge and then the roof cover.
Ensure the Appliance is unplugged and empty
。
Adjust the two leveling feet to their highest position
。
We recommend you have someone to assist you
。
1. Disassemeble the screws behind the fixed roof with cross-slot screwdriver and
remove the cover from the refrigerator.
2. Remove the screws fixed the top-hinge with cross-slot screwdriver.
NOTE:
To take the door off it is necessary to tilt the Appliance backward.
You should rest the Appliance on something solid e.g.a chair just below the top panel.
Do not lay the Appliance completely flat as this may damage the coolant system.
