en
en
22
Ardo medical AG
4.3. operation
Vacuum and cycles can be adjusted independently of each other. Select
the adjustment which is the most comfortable for you.
4.3.1. Switch on / switch off
Switch on the unit by pressing the “ON / OFF” button once.
A ‘welcome’ page will be displayed.
When it is switched on, the breast pump is in stimulation mode (orange
display). Medium vacuum and cycle level. To turn the unit off, press the
“ON / OFF” button once again.
The “ON / OFF” function is the same for battery operation, mains power
supply or 12vDC power supply (car battery operation).
Display mode:
The operation mode is shown on the illuminated LCD display. The display
turns off when the unit is switched off.
4.3.2. Regulation of the vacuum and display
The vacuum (suction strength) can be adjusted,
one level at a time
, by
repeatedly pressing
, or by
holding down
the vacuum button
(to the left side of the key pad). The vacuum strength can be individually
regulated in both stimulation mode and expression mode.
Pressing the ‘up’ arrow increases the vacuum, pressing the ‘down’ arrow
reduces the vacuum. The vacuum strength is displayed on the bar chart to
the left.
4.3.3. Cycle regulation and display
The cycles (frequency) can be adjusted,
one level at a time
, by
repeatedly pressing
, or by
holding down
the cycle button (to the
right side of the key pad). The cycle can be individually regulated in both
stimulation mode and expression mode.
Pressing the ‘up’ arrow increases the cycles level, pressing the ‘down’ arrow
reduces the cycles level. The cycles level is displayed on the bar chart to
the right.
ARDO_GA_Carum_Inhalt_NEU.indd 22
12.10.12 10:48
