ENGLISH
GENERAL
Carefully read the contents of this leaflet since it provides
important instructions regarding safety of installation,
use and maintenance. Keep the leaflet for possible future
consultation. All the operations relating to installation
(electrical connections) must be carried out by specialised
personnel in conformity with the regulations in force.
1.1 The principle of induction:
The system of cooking by induction is based on the physical
phenomenon of magnetic induction. The fundamental
feature of this system is direct transfer of heat energy from the
generator to the pan without intermediate means (different
from traditional cooker tops see Fig.1).
1.2 Advantages:
If you compare your electric cooker tops, with the induction
cooker top, the result will be:
- Safer:
low temperature on the glass surface.
- Quicker:
brief heating times.
- More precise:
the top reacts immediately to your
commands.
- More efficient:
90% of the energy absorbed is tran sfor med
into heat.
Furthermore, once the pan has been removed from the hob,
heat transmission is stopped immediately, thereby preventing
the needless dispersion of heat.
The system also automatically recognises the various
diameters of all pans and uses a suitable power level for
each size.
This means that we are able to use pans of various sizes,
provided that the pan diameter is no more than 10% larger
- or 40% smaller - than the printed detail marked on the hob
(Fig.4B).
Caution:
if you are using a pan with a diameter which is more
than 40% smaller than the printing marked on the glass, the
cooking zone may not be activated.
1.3 Cooking vessels (Fig.4A):
Cooking by induction uses magnetism to generate heat. The
vessels must therefore contain iron.
Check if the vessel material is magnetic using a magnet.
Important:
To prevent permanent damage to the cooker surface, do
not use:
- Pans with bases that are not perfectly flat.
- Metal pans with enamelled bases.
- Do not use pans with rough bases as they may scratch the
hob’s surface.
SAFETY WARNINGS
This apparatus is not suitable for use by children or persons
who need supervision. Do not allow children to play with
the apparatus. Before using the induction cooker top it is
important to check that the apparatus is compatible with
anyone who has a pacemaker and active surgical implants.
Before connecting the appliance to the electricity
supply:
- Check that the voltage and power values listed on the data
plate (positioned on the lower part of the appliance) are
compatible with the electricity supply and socket. If you
have any doubts, please consult a qualified electrician for
assistance.
Important:
- Metal objects such as knives, forks, spoons or lids must not
be placed on the cooker surface as they can get hot.
- After use, switch the cooker off using the control device and
do not rely on the pan detector.
- Avoid liquid spilling, therefore to boil or heat liquids reduce
the heat supply.
- Do not leave the heating elements switched on with empty
vessels or without vessels.
- When you have finished cooking, switch off the relative
resistance using the control indicated below.
- Never use aluminium foil for cooking, or never place
products wrapped in aluminium foil onto the cooking surface.
The aluminium would melt and damage your apparatus
irreversibly.
- Never heat a tin or can of food without opening it – it could
explode! This warning applies to hobs of all types.
- The use of high power like the Booster function is not
suitable for heating some liquids like, for example, frying
oil. The excessive heat may be dangerous. In these cases, we
recommend using a lower power.
- The containers must be placed directly on the hob and must
be centred. Do not, in any case, insert objects between the
pan and the hob.
- In a situation of high temperatures, the appliance
automatically decreases the power level of the cooking
areas.
Attention:
steam cleaners must not be used.
Attention:
if the surface is cracked, switch the ap paratus off
to prevent electric shocks.
Attention:
the appliance is not intended to be operated
by means of external timer or separated remote-control
system.
This appliance conforms to the European Directive EC/2002/96,
Waste Electrical and Electronic Equipment (WEEE). By making
sure that this appliance is disposed of in a suitable manner,
the user is helping to prevent potential damage to the
environment or to public health.
The symbol on the product or on the accompanying
paperwork indicates that the appliance should not be
treated as domestic waste, but should be delivered to a
suitable electric and electronic appliance recycling collection
point. Follow local guidelines when disposing of waste. For
more information on the treatment, re-use and recycling of
this product, please contact your local authority, domestic
waste collection service or the shop where the appliance was
purchased.
INSTALLATION INSTRUCTIONS
These instructions address specialised installers and serve
as a guide for installation, adjustment and maintenance in
conformity with the laws and regulations in force.
Positioning (Fig.4):
The appliance is made for fixing into a worktop, as shown in
GB
- 27 -
Summary of Contents for PI58F
