Original User Manual
–
A
REBO
S Heating Pad
10
4
Using the heating pad
For controller KS6:
4.1 Application method
•
Press on/off key for 3 seconds to start up (3 beeps).
Please set preheating at the highest tap
“6” position 10 minutes before using
•
When it is started up initially, the temperature display is 3. Press Temp key and the
temperature tap position among 1.2.3.4.5.6. When using it, select the appropriate tap position
according to human body’s feeling, If you will use it for a long time, please set at “1” tap
position which is the lowest position so as to avoid overheating which may cause human body’s
discomfort.
•
After 90 minutes the heating pad switches off automatically.
•
Press on/off key for 3 seconds to shut off when you stop to use it.
NOTE!
•
If display is “P”, please check whether the coupler of the product has been connected firmly
or not, then restart it. If the fault cannot be removed, it means the internal connection of the
product has problems and it needs to ask help from after sales service.
•
If display is “E”, it means the product has been broken.
•
If the temperature on the controller displays as “C” which means the controller has been
overheated, please disconnect the heating pad from the mains, and wait till the controller
cools down then it is safe to use.
4.2 After use
When the heating pad is not in use, please switch the controller to the off position; remove the plug
from the power socket. If the heating pad is not to be used for a long period of time, store the heating
pad in a cool and dry place.
If you want to stop using the heating pad, press the on/off switch to switch the heating pad off and
remove the mains plug from the wall socket. Always pull on the plug, not on the mains cord.
