User’s Manual
–
A
REBO
S Patio Heater 2000W
7
4. Assembly
4.1 Wall mounted function
1.
There are 4 brackets and fasteners used with the heater. Furthermore, in the canal of back side of
the heater there are 4 square fastener washers 25×25mm. Take the square washers and fasten 2
brackets to the canal of the backside of the heater by the help of screws (Figure 1).
2.
Fasten the brackets at the appropriate distance of each other (45-55cm) (Figure 2) .
3.
Two other brackets are fastened by the help of fasteners at the appropriate distance on the wall
parallel to the floor (at least 1.8 m from the floor and at least 0.75 m from the ceiling). (Figure 3).
