User’s Manual
–
A
REBO
S Auto Vacuum Drywall Sander
12
Cleaning and Maintenance
•
Keep clean tools, clean up debris and dust.
•
Often change grease (gearbox, the bearing) holding tool flexible operation.
•
Always check the power cord, plugs, switches, etc., so the tool is in good condition.
•
This tool passed rigorous quality inspection. If the machine is damaged nonetheless, please
send it to an authorized customer service (SWAP) for repair.
Carbon Brush replacement
•
The accessories include an original set of carbon brush, when the carbon brush wear limit,
replace with the new one. "+" screwdriver counter clock wise unscrew the brush cover,
remove the original carbon brush, to put new carbon brush to brush holder and screw on the
brush cover.
Technical Specifications
Power
750 W
Voltage supply
230-240 V
Frequency
50 Hz
Speed
1000-1850 rpm
Protection class
II
Disc Diameter
Ø225mm
Lpa
83,1 dB(A); KpA = 3 dB(A)
Lwa
94,1 dB(A); KwA = 3 dB(A)
Net weight
9 lbs (4.1 kg)
Wear ear-muffs
•
The impact of noise can cause damage to hearing.
Overall oscillation value determined according to EN 60745
Vibration emission value ah, DS=1.171m/ s², Uncertainty K = 1,5 m/s²
•
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another; the declared vibration total
value may also be used in a preliminary assessment of exposure.
•
Warning
that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used; and of the need to
identify safety measures to protect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger
time).
