background image

User’s manual –

 A

REBO

S Multifunction tool 5in1 (Premium) 

 

21 

 
 

EU Declaration of Conformity 

We,  
 
Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany, 

 

Hereby declare that the product named below, seen its design and construction as well as according 

to our sales, has been complied with the relevant and basic health and safety EU-requirements. 

 

 
Name of the product:  Arebos Multifunction tool 5in1 (Premium)   
Art. Nr.: AR-HE-MT51PT 
Model Nr.: 4260627421107 
 
If the product has any modification not allowed by us, this declaration loses ist validity. 
 
Tested acc. to: 
EU guidelines: 
2006/42/EG                                            
2014/30/EU                                            
2000/14/EG                                            
Harmonized standards: 
EN ISO 11806-1:2011 
EN ISO 14982:2009 
EN ISO 22868:2011 
EN ISO 22867:2011 
Sound power level: 
EN ISO 3744 
 
Date/Manufacturer Signature/Location:  

          Würzburg, 05.12.2019 

 

Identification of the signatory:                
Korhan Canbolat, head of the company  
 
Authorised representative for the technical documentation:  
Korhan Canbolat  
 

Office address:                                                                                                   

Canbolat Vertriebs GmbH                                                          

             

Gneisenaustraße 10-11                                                                                     
D-97074 Würzburg                                                                                             
 
Return address can be found in the imprint: https://www.arebos.de/impressum/ 
 
VAT identification number: DE 263752326 
Court of the Commercial Register is Würzburg, HRB 10082 
WEEE Reg.-No. DE 61617071

 

 

Summary of Contents for AR-HE-MT51PT






















Reviews: