ARECONT VISION AV100 VIDEO SYSTEM USER MANUAL
16
Arecont Vision 425 E Colorado St, 7
th
Floor Glendale, CA 91205 Revised 12/20/2010
www.arecontvision.com
www.arecontvision.com
www.arecontvision.com
www.arecontvision.com
for third party software, then exits the Installer. These files are located by default in
“C:\Documents & Settings\All Users\Application Data\Video Application” in Windows XP
This option opens a dialog to add cameras manually. Remote units are cameras that
may not be present on the local area network or may not have been installed normally.
Users should use this feature only if the camera’s MAC and an available IP address is
known and connectivity has been verified.
Take snapshots for all installed cameras and display them. The displayed snapshots
can be saved or printed.
This option sets a lock on camera to protect its IP Address from being changed by the
Camera Installer or any other software, or manually, unless the lock is first removed. An
asterisk will appear next to the IP Address of any locked cameras. This option is
available for firmware version 64116 or higher.
This option removes the lock set on camera as well as the asterisk next to the IP address.
An unlocked camera’s IP address can be then modified manually or by the camera
Installer, or any other software.
Tools
Tools
Tools
Tools
This option deletes .ini file which has camera settings saved in it.
This option opens command prompt window and disables firewall.
This option opens command prompt window and adds AV100 software to firewall
exceptions.