A&E Specifications
Rev 121409
AV3110
425 E. Colorado Street, 7
th
Floor
(818) 937-0700
Page 1
Glendale, CA 91205
www.arecontvision.com
AV3110
3 Megapixel Color Camera
AV3110DN
3 Megapixel Day/Night Camera
Bid-Spec
1.0 Description
The AV3110 compact series camera is an MJPEG encoding, 3.0 Megapixel resolution, IP addressable
camera, designed to deliver full motion high definition progressive scan digital video across local area
networks in a compact package. The AV3110 is a high sensitivity, PoE (IEEE 802.3af) compliant camera
with color and Day/Night configurations. Built with Arecont Vision’s proprietary massively-parallel
MegaVideo
®
technology, the AV3110 has the ability to output multiple image formats allowing the
simultaneous viewing of the full resolution field of view and regions of interest for high definition forensic
zooming. This camera offers over ten times the resolution of standard resolution IP cameras with the
ability to output full real time frame rates.
2.0 Bid Specification
The camera shall utilize a high sensitivity 3 Megapixel CMOS sensor with 1/2” optical format.
The camera shall support MJPEG encoding format.
The camera shall output at a maximum resolution of 2048(H) x 1536(V) pixels at a maximum
frame rate of 15 frames per second (FPS).
It shall be possible to program the camera to output a variety of lower resolution images, i.e.
1280(H) x 1024(V) pixels at 32 FPS, or 1600(H) x 1200(V) pixels at 24 FPS.
The camera shall feature streaming of the full field of view (FOV) and simultaneous multiple
regions of interest (ROI) for forensic zooming.
The camera shall be equipped with a 100 Mbps LAN connector and can deliver image data at a
maximum data rate of up to 55 Megabits per second (55 Mbps).
The camera shall use a wide variety of C/CS mount 1/2” lenses. (Note that some CS lenses and
all C-mount lenses may require an adaptor ring. Megapixel quality lenses are the preferred choice
for our entire camera line.).
The camera shall provide 21 levels of compression quality for optimal viewing and archiving.
The camera shall support a minimum TFTP and HTTP network protocols.
The cameras shall feature precision motion detection with a minimum of 64 detection zones.
The camera shall feature automatic exposure, automatic multi-matrix white balance, shutter
speed control, 50/60Hz selectable flicker control, programmable brightness, saturation, gamma,
sharpness, windowing and decimation, simultaneous delivery of full-field view and zoomed
images at video frame rate, instantaneous electronic zoom, pan and tilt, and electronic image
rotation by 180 degrees.
The camera shall incorporate necessary algorithms and circuits to detect motion in low light with
clarity.
The camera shall support a minimum illumination of 0.2 Lux @ F1.4 in color mode.
The camera shall support an IR sensitive minimum illumination of 0 Lux in B/W mode (DN version
only).
The camera’s power source shall be Power over Ethernet (PoE) complying with the IEEE 802.3af
standard.
This camera shall feature a durable aluminum housing that minimizes fire hazards. Camera
should be mounted using a 1/4” x 20 threaded hole at the bottom of the housing.
The camera shall be utilized for indoor use but can be used in outdoor applications with an
appropriate enclosure.
The camera’s operating ambient temperature is 0ºC (32ºF) to 50ºC (122ºF).
The camera shall be FCC Part 15, Class A, CE and RoHS compliant
