Arecont Vision MegaDome
®
2 Installation Manual
9 |
P a g e
MegaDome
®
2 Accessory (Sold Separately)
Pendant Mount (MD-CMT) Installation Instructions
Inside the box:
A. Top shield
B. Pendant Mount
C. Mounting template
D. Pack of four (4) small machine screws
E. Pack of four (4) machine screws
F. Pack of four (4) wood screws and four (4)
dry wall anchors
G. One double-sided hex key
H. Small square rubber gasket
I.
Large round rubber gasket
J.
#2 Phillips head screwdriver
Not included but needed:
Image 21
1. Remove Pendant Mount and hardware from
the box.
Image 22 Image 23
2.
Using the mounting template, prepare the
mounting surface for camera installation.
3.
Place small gasket onto pendant mount
shown in
image 22.
4.
Attach the top shield to the pendant as shown
in
Image 23
using four machine screws (E)
provided.
5.
Install the large round rubber gasket onto the
pendant as shown in
image 23
. Be sure to
align the holes appropriately.
6.
Run the Ethernet cable and outside power
cable (if necessary) through the Pendant.
7.
Attach the pendant to the ceiling using the
four wood screws provided or any optional
hardware suitable for the mounting surface.
8.
For installation of the camera, please
reference “
Mounting the Camera.
”
E
C
H
G
D
B
A
I
F
