Arecont Vision MegaDome
®
2 Installation Manual
11 |
P a g e
MegaDome
®
2 Accessory (Sold Separately)
Flush Mount Adapter (MD-FMA) Installation Instructions
A. white trim ring
Inside the box:
B. Flush mount adapter
C. Mounting template
D. Pack of four (4) machine screws and one
(1) eyelet
•
#2 Phillips head screwdriver
Not included but needed:
Image 26
1.
Remove the flush mount adapter, trim ring
and hardware from the box
2.
Attach the dome to the flush mount adapter
as shown in
Image 27
. Please reference
“
Mounting the Camera,
” if needed.
3.
Using the mounting template, cut a hole in
surface for mounting.
4. Insert the flush mount adapter into the hole.
5.
Tighten the “lever screws” until the flush
mount adapter is snuggly installed, as shown
in
Image 27
. The “Support Arm” will ride down
the screw to compress the mounting surface
.
NOTE: Do not over-torque the lever screws.
6. Attach the trim ring to the flush mount adapter
by rotating clockwise as show in
Image 28.
Image 27
Image 28
B
C
A
Lever
Screw
D
Support
Arm
