Arecont Vision MegaDome
®
2 Installation Manual
13 |
P a g e
MegaDome
®
2 Accessory (Sold Separately)
Pole Mount Adapter (MD-PMA) Installation Instructions
A. Pole mount adapter
Inside the box:
B. 2x compression fittings
C. 2x small steel straps
D. 2x large steel straps
E. Pack of four (4) machine screws
•
#2 Phillips head screwdriver
Not included but needed:
•
MegaDome
®
wall mount, MD-WMT2
Image 31
1.
Remove the pole mount adapter,
compression fittings, steel straps and
hardware from the box.
2.
Install the compression fittings to pole mount
adapter as shown in
Image 32
.
3.
Attach MegaDome
®
4. Run the Ethernet cable and outside power
cable (if necessary) through the compression
fittings and MegaDome
wall mount MD-WMT2 to
pole mount adapter as shown in
Image 33
.
®
5. Use the supplied two steel straps to attach the
Pole Mount Adapter to the pole and tighten
the compression screws as shown in
Image
33
.
wall mount, MD-
WMT2.
6. Attach the dome to wall mount adapter.
Please reference “
Mounting the Camera,
” if
needed.
7. Tighten the compression fittings to seal the
wiring holes.
Image 32
Image 33
A
B
C
D
E
MD-WMT2
Compression
Screws
