Arecont Vision MegaDome
®
2 Installation Manual
7 |
P a g e
MegaDome
®
2 Accessory (Sold Separately)
Wall Mount (MD-WMT2) Installation Instructions
MD-WMT2 only fits with SV-JBA and SV-EBA but
not with the older MD-JBA and MD-EBA!
Caution:
A. Wall mount
Inside the box:
B. Top shield
C. Mounting template
D. One double-sided hex key
E. Pack of four (4) machine screws
F. Pack of four (4) wood screws and four (4)
dry wall anchors
•
#2 Phillips head screwdriver
Not included but needed:
Image 17
1.
Remove the wall mount and hardware from
the box.
Image 18
2.
Using the mounting template, prepare the
mounting surface.
3. Attach wall mount to the wall using drywall
screws or any optional hardware suitable for
the mounting surface.
3.
Install top shield on the wall mount as shown
in
image 18
.
4.
Fasten the socket set screw using the double-
side hex key (D).
5.
Run the Ethernet cable and outside power
cable (if necessary) through the wall mount.
6. For installation of the camera, please
reference “
Mounting the Camera.
”
B
E
D
C
A
F
