Arecont Vision MegaDome
®
2 Installation Manual
8 |
P a g e
MegaDome
®
2 Accessory (Sold Separately)
Junction Box Adapter (SV-JBA) for MD-WMT2 Installation Instruction
SV-JBA should always be used in conjunction with
a wall mount, MD-WMT2, for outdoor installation.
Caution:
SV-JBA will only fit with the MD-WMT2 wall mount.
It does not fit the camera dome or older wall mount
MD-CMT!
A. Junction Box Adapter
Inside the box:
B. Pack of four (4) machine screws
C. One double-sided hex key
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. Mounting template
•
#2 Phillips head screwdriver
Not included but needed:
•
Wall Mount, MD-WMT
•
¾” NPT Conduit (if necessary)
Image 19
1.
Remove junction box adapter and hardware
from the box
Image 20
2.
Remove the conduit plug by first removing the
socket set screw using the provided hex key
(C).
3. Attach the junction box adapter to the wall
using drywall screws or any optional hardware
suitable for the mounting surface.
4.
Attach the wall mount to junction box adapter
then attach cap to the wall mount as shown in
Image 20
.
5. Connect ¾” NPT Conduit to the junction box
adapter.
6. Run Ethernet cable and outside power cable
(if necessary) through the Junction Box
Adapter and Wall Mount.
7.
For installation of the camera, please
reference “
Mounting the Camera.
”
B
C
A
D
E
