3/4
USER'S MANUAL
To select line 2, press the wheel and at the same
time rotate it to bring the symbol 2 in
correspondence with the arrow.
To select line 1, press the wheel and at the same
time rotate it to bring the symbol 1 in
correspondence with the arrow.
The locking mechanism prevents the rail adapter
from being removed until an ignition line is
selected. Return the wheel to position 0, unlock
the adapter by moving the lever to the side
position and remove the appliance from the track.
To prevent accidental falls it is necessary to
support the appliance during the whole operation.
Respect the polarity LNE indicated on the
terminals of the electrified track.
It is essential that each appliance is correctly
grounded and that the electrical installation
complies with all current good technical and safety
standards.
The device allows to adjust the projection angle
both on the horizontal plane and on the vertical
plane.
The fork allows an adjustment of the projection
angle of 130°/+ 130° with respect to the vertical.
For adjustment on the horizontal plane, rotate the
spotlight with respect to the track. The system
allows you to rotate the fork for an angle of about
270°.
In case of installation for direct lighting, pay
particular attention to avoid dazzling phenomena
towards people present.
