3/8
USER'S MANUAL
BEFORE STARTING
Remove the product from the shipping carton,
checking that all the components supplied are
present in the box. Refer to the following packing
list to check which components must be present
in the packaging. If any component is missing or
damaged, contact your Arena Luci dealer
immediately.
n° 1 projector PROMO 5 LED Elite
Before starting the installation of your product
make sure that there are no evident damages
caused by transportation. In the event that the
projector is damaged, do not plug it in and do not
attempt to use it until you contacted your Arena
Luci dealer for assistance.
INSTALLING THE PROJECTOR
Attach the projector by means of the central hole
diameter 12mm on the fork; for suspended
applications, you must also fix the projector with a
safety chain securing it to the support structure
and the ring arranged on the side panel of the
projector. It is also possible to remove and rotate
the fork on the bottom side of the projector for a
mounting on tripod, for example, when it is
necessary to install the rain cover, accessory
available on request.
Loosen the side knob to adjust the tilt of the
projector (+55° / 55°); once positioned, tighten
the knob firmly.
The projector must be fixed on a suitable support
which remains stable during operation. Always
make sure the stand or structure to which you are
setting the projector is secure and is able to bear
the weight of 10 kg of each unit, plus 3.3 kg for the
rain cover.
POWER SUPPLY MAINS
Disconnect the mains voltage from the system.
Connect the power cord to the mains supply,
paying attention to the voltage and frequency
indicated on the label.
Respect the LNE polarity indicated on the
terminals (color brown = L, blue = N, yellow /
green = E).
It is essential that each projector is correctly
earthed and that electrical installation conforms to
all the standards of good practice and safety
regulations.
The projector does not have builtin on/off switch
and turns on immediately when power is supplied.
