4/8
PROMO 5 LED
It is recommended that the projector is connected
to the mains via a proper switch, so that it can be
turned on and off individually.
Caution
It is important that the ground connection of each
projector is run according to the rules in force.
The power absorption of the projector is 160W.
GOBO HOLDER
Disconnect the mains voltage from the system.
The gobo holder can be accessed by removing
the top cover, after unscrewing the Allen screw
from the rear panel.
Once the cover has been removed, you will have
access to the internal compartment. To insert a
gobo in the motorized assembly, unscrew the
Allen screw and remove the assembly from the
support frame.
In the front side of the gobo holder you can see
the 12V ac motor, in the rear side there are the
gears. Two housings are available for gobos of
different diameters: the larger one can mount a
70mm diameter gobo, the smaller one can mount
a 51mm diameter gobo. In both cases, the image
can have a maximum diameter of 48mm.
