51
English
Important note: On the outside there is a scale. Please make sure not to fill in more
than the maximum level as marked on the scale. If the kettle is overfilled, boiling
water can be ejected. Put the kettle on the base. On the base station there are
buttons for selecting different water temperatures. Press the button which corre-
sponds to your desired temperature. The button starts flashing. In order to begin
the cooking process, press the “ON / OFF” button. The LED of the “ON / OFF” button
switches from green (OFF) to red (ON). As soon as the water reaches the target
temperature, the kettle switches off and it will produce a short beep. The heating
element switches off automatically and the process has been completed. Now the
unit can be lifted up and the water can be used.
5.1 “KEEP WARM”
The “KEEP WARM” function allows you to maintain a specific temperature. Press
“KEEP WARM” and select a temperature. Make sure you are able to select only
70 ° C, 80 ° C or 90 ° C. Once you have selected your desired temperature, press
the “ON / OFF” button. Then the kettle heats up to the previously set value and
holds it.
6 Decaling and cleaning
We recommend decalcifying the kettle in regular intervals, depending on the in
-
tensity of use. Before cleaning, it is essential to remove the power plug from the
socket and wait until the device is completely cooled down. The scale filter is locat
-
ed prior to the spout. To remove the filter, open the cover and push the plastic flap
downwards. Then deep clean the taken filter with warm water and insert it into
the holder again. When inserting the filter, take care that the retaining lug is fixed
to the guide rail.Only use conventional decaling agents based on citric acid. Please
follow the manufacturer´s instructions for dosing the respective product you have
chosen. The heating element must not be cleaned and never be processed with
sharp or hard objects. For cleaning the outer surface of the kettle, only use a damp
cloth. Never use hard or abrasive objects like a wire brush or a steel-sponge for
cleaning. Please do not use any aggressive cleaning agents which could be harmful
for human consumption or damage the surface.
