20
English
5 Button functions
6 LED indicator
7 Initial use
Take the device out of the package and remove all the packaging material. Place
the vacuum sealer on a level surface and insert the power cord into a properly
installed socket.
Then place a vacuum bag with the open side into the vacuum sealer. Ensure that
the end of the bag touches the plastic tabs of the vacuum sealer. Close the lid
of the device by pushing the lid down with both hands until it locks. Press the
"Vacuum & seal" button to start the vacuum and sealing process. Press the "Seal"
button if you only want to seal the bag. The respective operation is active as long
as the status LED is glowing. Press the left and right unlocking button inwards
to open the lid again subsequently. Press the "Stop" button in the middle of the
device to cancel the respective operations.
Sealing
Starts the sealing function
Stop
Cancel all functions /activate standby mode
Vacuum & seal
Starts the vacuum and sealing function
Green LED
Status LED vacuum packing
Red LED
Status LED sealing
Summary of Contents for 303059
Page 1: ...User Manual VACUUM SEALER Mod Nr 303059 ...
Page 26: ...26 Notes ...
Page 27: ...27 Notes ...