48
English
Error
Error reason
Troubleshooting
Smoke comes out
of the vent during
baking
Some ingredients are
too close to the heating
elements or sticking to
them
Disconnect the plug from the sock-
et, allow the appliance to cool down
completely and clean the heating
elements.
The crust of the bread
is too thick
The bread was kept warm
for too long and left in
the mould
Remove the bread as soon as pos-
sible and keep it warm only when
needed.
The ingredients are
mixed unevenly and
the bread is
not
baked satisfactorily.
- Inappropriate program
selected
- The lid was opened too
often
- The rotation resistance
is too high, and the
kneader cannot rotate
properly
- Select the correct program.
- Do not open the lid when the
program is running.
- Check if the kneader is seated
properly. If you detect a problem,
do not hesitate to contact our cus-
tomer service.
The bread is so large
that it is pushing
against the lid
-Too much yeast, water
or flour has been used
- Ambient temperature
too high.
Check the quantity of yeast, water
or flour, adjust the quantity if
necessary.
The bread is too small
and has not risen
Not enough yeast was
used. It is possible that
the yeast is old and
inactive. Another reason
may be very high water
temperature.
Use more yeast and check the water
temperature.
The display shows
"H HH" after pressing
the "Start / Stop"
button
The inside temperature
of the bread machine is
too high.
Open the lid of the appliance and
allow the machine to cool down
completely.
The motor has
switched on audibly
but the dough is not
kneaded
The baking mould is not
fixed properly or the
quantity of dough is too
much to be kneaded
Check the attachment of the baking
mould or the quantity of dough and
the quantity specified in the recipe.
Summary of Contents for 303528
Page 1: ...BREADMAKER User Manual Mod Nr 303528 20190108FS002 ...
Page 138: ...138 Notes ...
Page 139: ...139 Notes ...
Page 140: ...WD Plus GmbH Wohlenbergstraße 16 D 30179 Hannover ...