3.8 Configuration of the Robot
The configuration menue Figure 3.9 can be accessed by clicking on the “tool symbol” on the right upper
corner of the browser window Figure 2.7.
The Marvin Robot configuration can be easily achieved via the iRP WebIDE. Simply click on the drop-down
menue Figure 3.9 or tick-mark the selection field.
To confirm the configuration you have to tick-mark the “accept configuration” field on the lower left corner
of the configuration screen and follow the instruction to power cycle the robot.
Figure 3.9
Marvin WebIDE.Configuration Screen
AREXX Engineering & JM³ Engineering
Version: 1.3.1
October 27, 2017
Page: 31
