1. PRODUCT DESCRIPTION
Warning
•
No return is possible after having opened the bags of components and pieces
•
Prior to the assembly read the manual thoroughly.
•
Be careful when using tools.
•
Keep away from young children They might get hurt by the tools or swallow small
components.
•
Observe the correct polarity of the power supply.
The MRAI is a serial port Input/Output controller, it can be controlled with the
supplied Windows robot arm software or a terminal emulator (like. Windows
Hyper Terminal or LINUX Minicom) and a Personal Computer. MRAI has 20
switch transistors to control the MOVIT or OWI robot arm motors. There is
1 optocoupler input so the robot arm can react on signals from the outside
world.
The MRAI controller is commanded with very simple instructions. With the
Robot Arm software application you can control the MOVIT or OWI Robot
Arm directly or you can make your own program in a Basic computer
language. In this Basic program language you can use the IF/THEN and
GOTO statements. Of course, the optical inputs can also be used. A few
example programs and an educational mode will help you to learn the Basic
programming step by step.
Specifikation:
Power
: 3 pcs AA batteries
Voltage
: 4,5 Volt
Current
: About. 100 mA
Height
: 40 mm
Lenght
: 100 mm
Width
: 70 mm
To control the MOVIT-OWI robot arm
