Charging
Removable batteries are charged using the provided 2-slot charger, which comes with its
own instruction manual. They can also be charged more slowly, one at a time, when
installed in the hoop if the hoop is connected to a USB power source. Note that the
Hyperion Lite does not have an internal charger.
Non-removable batteries must be charged via USB. Simply plug your hoop in to any USB
power source with the provided cable, or any Micro-USB cable.
Automatic Sleep Mode
When it’s flat on the ground and not moving, the hoop will automatically go to sleep after
a few seconds. It’ll wake up again as soon as you move it. This function can be turned off
in the configuration file. It’s useful for working with multiple hoops on stage or if you’re
just taking a break at a festival. It still uses some power, though, and shouldn't be left in
sleep mode for more than a couple of hours.
What To Do When Something Goes Wrong
If you have trouble with your hoop, please jump to the troubleshooting section of this
manual for things to check and fixes for common problems.