44-Key remote functions (from upper left to lower right)
Brightness up/down
Hold current pattern or resume auto-play
Thumbs up / down – see playlist management
Show battery level
Next folder
Jump to folder 1-16 (numbered buttons)
Next / previous pattern (purple arrow buttons)
Next / previous palette (painter’s palette icon)
Change motion mode (color swirl icon)
Faster / slower auto-play time (rabbit and turtle)
Saved favorite patterns (stars 1-6)
Sync to music tempo (music note icon)
Shuffle on / off (twisted arrows icon)
Wireless link control
Sleep
Special functions
Menu (reserved for future use)
For best results, aim the remote control directly at the receiver. It’s located on the inner
edge of the hoop below the USB port.
Any Hyperion remote will work with any Hyperion hoop. If you’re using multiple hoops
close together, you can disable the hoop’s remote receiver temporarily to avoid
interference during a performance. To disable the remote receiver, press brightness up –
down – up – down. The hoop will briefly flash yellow, and the remote control will be
disabled until the next time the hoop is powered on. You can also disable the remote in
the configuration file.