20
7. Battery
SL - Speed limiter:
press the + or - buttons to increase or decrease the set speed limit (from 10 to 100).
CAUTION
In compliance with the requirements of European Directive 2002/24/EC, the pedal assistance provided by the electric motor
supplied with the product will automatically be cut off when a speed of 25 km/h is reached, even a higher value has been set.
HL - System parameter: Pre-defined value = 6
CAUTION
If faulty data for speed and distance are shown on the display, reset the correct value indicated by using the + or - buttons.
PA - Number of pedal assistance levels available:
press the + or - buttons to set the number of pedal assistance levels that can be selected while using the bike.
Values available:
UbE = test value, do not set
0-3 = 3 pedal assistance levels available (from 1 to 3)
0-5 = 5 pedal assistance levels available (from 1 to 5)
0-9 = 9 pedal assistance levels available (from 1 to 9)
The electrically power assisted cycle starts and powers its electrical and electronic functions through the lithium-ion battery
supplied with the product, correctly recharged and installed, turning the key clockwise to the ON position.
A. Unlock/lock/battery
activation lock
B. Charging socket for
battery charger (lock
side or opposite side
location)
C. Battery residual
charge status
indicator
Battery removal and insertion
The battery can be removed from the bike to prevent theft, for charging or to be stored in optimal conditions.
Removing the battery:
Insert the key supplied in the lock on the battery. Turn the key counter-clockwise to the unlocking position. After folding the
saddle and/or checking that its position does not obstruct the removal of the battery, grab the handle on the battery and pull it
out from its housing fixed to the frame, by pulling upwards.
Inserting the battery:
Insert the key supplied in the lock on the battery. Turn the key counter-clockwise to the unlocking position. After having tilted
the saddle and/or verified that its position does not obstruct the introduction of the battery, insert it in the appropriate seat
fixed to the frame by pushing down until it stops. Turn the key clockwise to the locked position to ensure that the battery is
secured to the frame.
Check that the battery is correctly installed and secured by trying to pull it out and/or making sure that it is securely fastened
to the frame and does not move.
