6
EG
Emix tank always works in heating mode even if the other units are working in cooling mode; during this operation
mode, Emix tank is able to recover the heat which would otherwise be lost in the outdoor air, significantly increasing
the energy efficiency of the entire system.
There are several possible configurations with Emix tank and the one represented in the previous figure is just one of
many.
The following diagram illustrates the concept exposed on the previous page and shows a system configuration where
three indoor direct expansion units, a hydrokit for a floor system and an Emix tank coexist, all connected to a G110.
Rating data
Emix tank 220
Emix tank 300
Power supply
230 V /1/50 Hz - 380 V /3/50 Hz
Minimum power input
4 W/0,05 A
Max power input
70 W/0,53 A
Water connection
3/4” G – 3/4” G
Refrigerant connection (R410A)
3/8” – 3/8”
Net weight
95 Kg
114 Kg
Dimensions (H/W/D)
1460x598x618 mm
1875x598x618 mm
Electric backup heaters
3 kW
It is warmly suggested to install a softener or a polyphosphate filter to avoid limestone and consequently performance
drop and a water filter 3/4 "
to be installed upstream of tap connection
; in addition to this, service valves, mixing valve
and vent valve are suggested. Please check hydraulic layouts at the end of this manual.
H
2
O
AW
AW
AF
HK
4
3
2
1