11
EN
PARtS AND FUNCtIONS
(Pic. 1)
INStALLAtION:
•
Unpack and set machine upright.
•
Put the machine on a horizontal surface.
•
Plug in the machine.
•
The socket-outlet should be installed near the equipment and shall be easily accessible
OPERAtION
FEEDING thE PAPER
1. Please check the voltage of your shredders carefully before using and then plug in
and press the switch, the power light is now on. The shredder is equipped with energy
saving system. after 5 seconds of iddle state the machine goes in "sleep mode", it takes
low power (almost "0") - the POWer signal turns off. When you insert the paper sheet
into entry gap the shredder goes in "stand-by" mode - the POWer signal ligths up.
2. Feed the paper into the proper entry and the machine will start automatically. When
the shredding will be over it will stop automatically.
3. if you want to stop shredding the paper, please set it to reverse. The machine will
reverse automatically and turn back the papers.
1. reV – reverse button
2. FWd – forward shreddding
3. indocators:
POWer
Overloading
Overheating
Full bin
4. Paper entry
5. cd / credit card entry
6. Transparent window
7. Wastebasket
8. casters
1 2
3
4
5
6
7
8
© arGO s.a.
www.argo.pl
