4
V 01/13
DESCRIPTION OF PARTS
HOW TO USE THE APPLIANCE
The appliance does not need to be installed.
Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): you will hear a
sound to indicate that the appliance is in standby and the fan can be switched on using the ON/SPEED button. The fan
can be switched off using the OFF button.
When you move the appliance, use the handle on the back. Do not use this fan in an area with high humidity, rich of dust
or with a temperature exceeding 40 ° C.
This product can be used both as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low, medium
and high) and as nebulizer.
MISTING FUNCTION
In this case the rear tank should be filled with demineralized water, up to but not exceeding the maximum level as
indicated.
Through a high-frequency vibration (not audible and not harmful to people) the water under the tank is
nebulized and sucked into the tube up to the misting plate where it is emitted into the room.
There is no need to heat or to add any chemical agent. The refreshing action of water can give a sense of well-being
when the environment is dry.
When the water below the tank falls below the minimum level, the appliance emits a sound and the nebulizer switches off.
1. Digital screen
2. Buttons
3. Control
panel
4. Air emission
5. Misting
plate
6. Front
cover
7. Water
level
8. Bracket
9. Back
cover
10. Back guard
11. Water tank
12. Drain cover
13. Lead wire
14. Swivel castor
