background image

8

EN

WALLNER 860/C8A0 SHREDDERS

NOTE!

• 

read the manual carefully before starting to work

• 

check whether the voltage and frequency given in the table at the bottom of the 
equipment are the same as in your socket

• 

do not use the machine if the waste basket is not installed

• 

do not use the machine if the waste basket is full

• 

pull the plug from the socket:
 a) before emptying the waste basket
 b) before any servicing or preservation actions are taken
 c) before opening the equipment in case of repair

• 

take note of the warning plate on the top of the machine to avoid serious injury 
when your jewellery, tie or hand are too close to the machine

• 

the machine may not be operated by children

IMPORTANT SAFETY NOTES

The machine can not be operated by more than one person at any given 
time!  The machine was designed for safe operation by „one person only”. 

During the shredding process no other work may be performed on the 
machine 
(for example cleaning, etc). 

Keep children away from the machine. This machine’s design and safety 
concept are based on adult dimensions to ensure that it can be operated 
safely by adults only.

Repairs must be executed by a qualified service personnel. 

 

 

Keep all loose articles of clothing, ties, jewelry, long hair or other loose ob-
jects away from opening, injury may result!  

Never insert fingers into opening. Serious injury may result!

                        

In case of danger unplug the machine. 

Always unplug the machine from the main power supply before 
opening the machine. 

When the machine is equipped with a plug with grounding, then it has to 
be connected to a socket with grounding!

Do not use canned air on shredder. Never use aerosol, petroleum based or 
other flammable products on or near shredder.

© ARGO S.A.

www.argo.pl

Summary of Contents for Wallner C860














Reviews: