Assembly Instructions
47
46
61
3
1
2
61
47
46
63
63
Step 1
Total mass of the product is
25 kg. Total surface area
(e.g. foot print) of equipment is
92 cm× 63 cm.
Install the Front bottom tube
(2)
and Back bottom tube
(3)
to
the Main frame
(1)
with Carriage
bolts
(61)
, Arc washers
(46)
and Spring Washer
(63)
Acorn
nuts
(47)
.
Step 2
Prior to assembly of this product, remove all components from the package and verify all the listed parts
are supplied. Once certain, begin with the first assembly step.
60
48R
51
64
27
6R
59
59
4R
57
52
56
10
12
1
41R
A: Insert the Handle bar shaft
(12)
through the Coupler bar
(4L/R)
to the Main frame
(1)
at the
same time, then fix with Bolt
(57)
, Spring Washer
(52)
, D sharp washer
(56)
, Washer
(10)
.
B: Insert the Pedal hinge bolt
(41L/R)
through the Pedal tubing
(6L/R)
to the Crank
(27)
and fix
with Wave washer
(64)
, Spring Washer
(51)
, Nylon Nut
(48L/R)
.Finally cover with plastic cap
(59)
&
(60)
.
Note: Both Pedals Hinge Bolts are labeled L FOR LEFT and R FOR RIGHT. To tighten turn
the left bolt COUNTERCLOCK- WISE and the right bolt CLOCKWISE. Move the Crank to a
proper angle for easily tightening the Bolts.
5
