Assembly Instructions
16
Step
25
Fit doors and handles
Note:
The easiest way to
attach each door and
. is to fit the top hinge
first, then align and fit the
other hinges.
a:
Push the hinge
onto the front part of the
hinge plate .
The recess at the bottom
of screw B goes into the
slot in the hinge plate.
b:
Keep the hinge
FLAT against the hinge
plate as you slide it
across as far as it will go.
Tighten screw A.
c:
The hinge must be
flat against the hinge
plate prior to any
adjustment.
d:
The hinge must
NOT be AT AN ANGLE
to the hinge plate
when assembled.
This would indicate that
the recess at the bottom
of screw B had not
located in the slot in the
hinge plate and the hinge
would not be secure.
Remove the hinge from
the hinge plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a handle to
each of the 2 plain doors
. using screws .
L
L
L
K
K
K
L
K
J
H
14
14
a:
b:
c:
d:
K
L
K
K
B
K
L
L
L
A
L
K
B
e:
H
H
J
14
14
15
Warning:
Glass! Handle
with care
15
J
