3 Printer operation
Printing a Configuration Report
40
3.3
Printing a Configuration Report
To perform a self-test and print a configuration report, helping to check printer’s
print quality and internal settings. Steps as below:
1.
Turn off the printer.
2.
Load media and ribbon.
3.
Press and hold the
FEED
button while turning on the power.
4.
When “SELF-TEST …” is displayed on the LCD, release the
FEED
button.
5.
The printer now prints out a configuration report. (as the sample in next page)
All characters will be printed in 2 columns: the right shows characters
received from your system, and the left are the corresponding hexadecimal
values of the characters. It allows users or engineers to verify and debug the
program.
For printer without LCD, please see indicators.
Sample of Configuration Report
Note: PPLB ONLY
Printer will enter Dump mode after printing
configuration. To return to normal operation mode from Dump mode, press
the
CANCEL
button. Another way is to turn off printer power, and then
restart printer.