3 Printer operation
Resetting to Factory Default Settings
50
3.4
Resetting to Factory Default
Settings
Be cautioned that this will reset all printer settings back to defaults; if possible, print
the configuration label in advance before reset. All settings stored in FLASH memory
are retained even after turning off the printer. Printer mode without LCD can see
indicators.
To
reset the printer to factory default settings:
1.
Turn off the printer.
2.
Press and hold the
CANCEL
button and turn on the printer.
3.
When “RESET …” is displayed on the LCD and the READY indicator blinks,
release the
CANCEL
button.
4.
When “READY” is displayed on the LCD, the READY indicator stops blinking
but remains illuminated.
5.
The following information is now back to defaults:
Label parameters
Heat (Darkness)
Speed
Others for specific emulation
For more detail information, refer to CH 3.1.1 NO.26
Load default
Note:
Print length meter which indicates label length already printed cannot
be reset.