Wireless keypad PU-R
7 strelec’s control
60
7.5
Arming
Before arming the list of global partitions,
make sure, their current status are normal ac-
cording to corresponding pictographs. Num-
bers should be glowing continuously.
The pictographs
,
,
and
should not be
displayed in the upper part of the window. If they are glowing, study Strelec’s sta-
tus according to the paragraphs 7.1-7.3.
To
arm
, type the following combination of buttons:
‹ ›
NN CCCC
where:
NN – user’s number, from 00 to 30. A user with the number 00 is an engineer.
CCCC – user’s code, from 0000 to 9999
If the operation has been completed successfully,
a window, reporting global partitions’ arming,
will occur and indication of partitions’ current
status will be changed (the numbers correspond-
ing to the numbers of global partitions will be
framed).
If any of the detectors is tampered, a window
with the number of the local partition, where
tampered detectors are located, will occur.
If there are any detectors tampered and forced
bypass allowed in the options of the wireless ex-
pander, a window requesting the detector’s by-
pass, will occur at the screen.
!
Partition 1 is armed
State
Menu
!
4 Partition is broken
State
Menu
?
Arming with bypass
4 Partition
No
Yes
Frames should be oc-
curred
