Delete All:
To delete all the photos, press button 2 for two seconds. “DELETE ALL?” will flash on the
screen. Press button 1 to confirm deletion; press button 3 to cancel action. When DELETE ALL has
flashed 4 times, the process of deleting will be cancelled.
Button 3 [Previous / Delete]
Previous:
In Manual Mode, press button 3 to display the previous image.
Delete Current:
To delete the current photo, press button 3 for two seconds. “DELETE CURRENT?”
will flash on the screen. Press button 1 to confirm deletion, press button 2 to cancel action. When
DELETE ALL has flashed 4 times, the process of deleting will be cancelled.
Picture Viewer Software Operating Instructions
Images are
added
to the keychain by using the Photo Viewer application. First, connect the
keychain to your computer with the provided USB cable. Open the photo viewer application by
clicking on the Photo Viewer icon on your desktop. If the “Can not connect to device!” dialog
appears, close the Photo Viewer application, reconnect the keychain and then restart the Photo
Viewer software.
The right frame of the Photo Viewer displays images, which may be added to the keychain by
clicking the DOWNLOAD button. It does not display the images currently on the keychain.
Adding Images:
Browse and select the images from the list on the upper-left and click the
ADD button. The image will appear in in the right frame of the window. Click the DOWNLOAD
button to add the images to the keychain. When “Downloaded” is shown on keychain screen,
click close, and then remove USB cable.
Note if you unplug USB from unit before closing software you will lose the downloaded
pictures.
Removing Images:
Select photo and click remove or remove all photos in the right frame.
Cropping:
Click CROP PHOTO, then draw a frame around the new image by dragging the
frame up, down or around the image.
