Aria-24
ipe
Digital Key Telephone System
Installation Manual
Issue 1.5
Aria Technologies
85
FLEXIBLE NUMBERING PLAN (PGM 105)
PROCEDURE
+ 105 + Enter Station Range +
000 001 002 003
100 101 102 103
(1)
[TRANS/PGM]
+ 105.
000 001 002 003
100 101 102 103
Station Number Assign. You will see the 4 station numbers
corresponding to the 4 port numbers. Station number length is in
the range of 2 digits through 4 digits. There are two methods for
changing station number.
Dial two station numbers - Range start station number & range end
station number, then LCD shows dialed range value. Press the
[HOLD/SAVE]
button, then station numbers changed from the
first station number on current LCD to range end (All LEDs of BTNs
are off.).
Press one of FLEX 1-4 (Each FLEX 1-4 is assigned to station
number 1- 4 on the current LCD), then LED of pressed Flexible
button is steady on. Dial new station number and press the
[HOLD/SAVE]
button, or press other Flexible button to assign
station number to other station without saving (The LED of pressed
Flexible button is on.).
If you want to delete all station numbers, press the
[SPEED]
button and press
[HOLD/SAVE]
button, then all station numbers
are cleared.
If you want to change next 4 station numbers then press [
▼
]
button. If you want to change previous 4 station numbers, then
press [
▲
] button.
000 001 002 003
100 400 102 103
(2)
Press the
[HOLD/SAVE]
button for saving database permanently.
(Ex: Press FLEX 2, dial 400 and press
[HOLD/SAVE]
button.)
(PGM NUMBER)
Dial two station numbers
- Range start station number
& range end station number
