© ArianaSpas
10 |
P a g e
4.2
Detailed Operation: RF& Ultrasound
Energy Level Display
Ultrasound&RF Energy Adjustment
Ultrasound Mode Adjustment (M1 is consecutive mode and
is suitable for thin fat layer; M2 is intermittent mode and is suitable for thick fat
layer.)
RF Mode Selection (NOR is the set mode. The red LED is on
and energy is at the set level and stay at the set level after turning on the device.
PRO is the smart mode. The red LED stays on and temperature goes up slowly to
the set energy and after the probe comes in full contact with the skin.)
Select
To go to the interface
below